| controls |
the delay time can be
controlled by a four step
sequenced lfo
there are four leds that
light up when the delay
time is set for that
particular moment with the
knob adjacent to it
having the delay time
controllable with a
sequncer offers
modulation of the delay
time that is more complex
than a standard lfo
each of the four steps of
the sequencer has a
separate control to adjust
the delay time
controlled by a four step
sequenced lfo
there are four leds that
light up when the delay
time is set for that
particular moment with the
knob adjacent to it
having the delay time
controllable with a
sequncer offers
modulation of the delay
time that is more complex
than a standard lfo
each of the four steps of
the sequencer has a
separate control to adjust
the delay time
this is where the speed of
the sequenced delay time
lfo is changed
sequencer on/off
when the sequencer is
turned off the delay time is
fixed and controlled
by the knob labelled del
turning the speed knob
clockwise increases the
speed of the sequencer
with the speed range
control switched upwards
the speed control has a
range from fast to super fast
with the speed range
control switched down the
speed control has a range
from slow to slow/fast
the sequenced delay time
lfo is changed
sequencer on/off
when the sequencer is
turned off the delay time is
fixed and controlled
by the knob labelled del
turning the speed knob
clockwise increases the
speed of the sequencer
with the speed range
control switched upwards
the speed control has a
range from fast to super fast
with the speed range
control switched down the
speed control has a range
from slow to slow/fast
the blast switch distorts the
wet signal from the delay
causing it to overpower the
dry signal (a wet override)
the kill switch mangles the
sound of the unit
the toggle switch
labelled on/off/on
when in either on position
causes self oscillation of the
unit
the blast switch when down
is off and has no effect on the
device
the kill switch when down is
in the off position and has no
effect
the on/off/on switch when in
the middle position is off and
has no effect on the device
wet signal from the delay
causing it to overpower the
dry signal (a wet override)
the kill switch mangles the
sound of the unit
the toggle switch
labelled on/off/on
when in either on position
causes self oscillation of the
unit
the blast switch when down
is off and has no effect on the
device
the kill switch when down is
in the off position and has no
effect
the on/off/on switch when in
the middle position is off and
has no effect on the device
1. input gain control
2 normal delay time
control
(active when delay time
sequencer is turned off)
3 delay feedback
control
4 mix wet/dry mix
control
gets overriden when blast
control is turned on
2 normal delay time
control
(active when delay time
sequencer is turned off)
3 delay feedback
control
4 mix wet/dry mix
control
gets overriden when blast
control is turned on
from left to right
signal output
power on/off
d.c nine volts in
signal input
signal output
power on/off
d.c nine volts in
signal input
